C146 10A006 102 5

Data sheet   heavy|mate®- C146 HSE Contact insert screw termination with wire protection Part No. C146 10A006 102 5   Series Heavy duty connectors heavy|mate® - C 146 Subseries Heavy duty connector heavy|mate®- C146 HSE View represents all available contact positions. COMMON CHARACTERISTICS No. of contacts   6 + PE  Weight male insert   80 g Weight female insert   80 g Rated voltage DIN EN 60664-1 / IEC 60664-1  400 V (600 V UL / CSA)  Rated impulse voltage DIN EN 60664-1 / IEC 60664-1  6000V  Rated current at 40°C   42 A Voltage proof DIN EN 60512-2, Test 4a / IEC 60512-2, Test 4a  2.200 V Installation category DIN EN 60664-1 / IEC 60664-1  III  Insulation group DIN EN 60664-1 / IEC 60664-1  ||  Insulation resistance DIN EN 60512-2, Test 3a / IEC 60512-2, Test 3a  ≥ 10  Ω Contact resistance DIN EN 60512-2, Test 2a / IEC 60512-2 Test 2a  ≤ 1 mΩ Clearance IEC 60664-1  ≥ 3,5 mm Creepage IEC 60664-1  ≥ 5,6 mm Current carrying capacity DIN EN 60512-3, Test 5b / IEC 60512-2 Test 5b  see derating curves  Pollution degree DIN EN 60664-1 / IEC 60664-1  3  Climatic category DIN EN 60068-1 / IEC 60068-1  40 / 125 / 21  Upper temperature   + 125 °C / 1000h  Lower temperatur   - 40 °C / 16h  IP degree of protection DIN EN 60529 / IEC 60529  IP00 unmated  Insertion and withdrawal force DIN EN 60512-13-2, Test 13b / IEC 60512-13-2, Test 13b  40 - 60 N  Mechanical lifetime IEC 60512-5; Test 9 a  ≥ 500 mating cycles Contacts   CuZn  Insert   PA  Colour   black  Contact plating   silver plated  Termination   screw  Wire gauge   0,5 - 6,0 mm² Flammability UL 94  V-0  ELECTRICAL CHARACTERISTICS 12 CLIMATICAL CHARACTERISTICS MECHANICAL CHARACTERISTICS MATERIALS FURTHER CHARACTERISTICS 600 V, 35 A E 63093 600 V, 35 A 48932 Data sheet   heavy|mate®- C146 HSE Contact insert screw termination with wire protection Part No. C146 10A006 102 5   Series Heavy duty connectors heavy|mate® - C 146 Subseries Heavy duty connector heavy|mate®- C146 HSE Drawing Dimensions in mm (Inch) View represents all available contact positions. Data sheet   heavy|mate®- C146 HSE Contact insert screw termination with wire protection Part No. C146 10A006 102 5   Series Heavy duty connectors heavy|mate® - C 146 Subseries Heavy duty connector heavy|mate®- C146 HSE Contact arrangement View represents all available contact positions.